One sheet, all your stickers
A UV DTF gang sheet is one sheet with all of your designs arranged on it, ready to cut apart. You pay for the sheet rather than per sticker, so every inch you fill brings your cost per piece down. Logos, labels, decals and wrap graphics can all share the same sheet.
These are hard-surface stickers, not garment transfers — they go on tumblers, mugs, glass, candles, signage and packaging, and they are applied by hand with no heat press.
How it works
- Choose your sheet length. Every sheet is 22.5" wide. Lengths run from 12" to 360" in 12" steps — 30 options in all.
- Lay out your artwork. Upload your PNGs, then drag, scale, rotate and duplicate them straight in your browser. Nothing to install.
- Add to cart. We print your sheet and ship it ready to apply.
Sizes and pricing
A flat $2.56 per square foot at every length. Larger sheets do not cost more per inch — they simply hold more.
| Sheet size |
Area |
Price |
| 22.5" × 12" |
1.88 sq ft |
$4.80 |
| 22.5" × 24" |
3.75 sq ft |
$9.60 |
| 22.5" × 60" |
9.38 sq ft |
$24.00 |
| 22.5" × 120" |
18.75 sq ft |
$48.00 |
| 22.5" × 240" |
37.50 sq ft |
$96.00 |
| 22.5" × 360" |
56.25 sq ft |
$144.00 |
Six of the 30 available lengths shown. Every 12" step between 12" and 360" is in the size selector above.
File requirements
- PNG files at 300 DPI with a fully transparent background.
- Sized at final sticker size. What you place on the sheet is exactly what we print.
- Trim the empty transparent space around each design before uploading.
- Keep edges clean and sharp. Soft or semi-transparent edges print with a visible halo.
Do not mirror your artwork. UV DTF prints right-reading — a mirrored file comes out backwards on the finished sticker.
Tip: small text and thin lines survive better on stickers than on fabric, but 300 DPI at final size is still the floor.
What we do not do
We print your files exactly as supplied — we do not remove backgrounds, resize artwork, or repair low-resolution images. We are a printing service, not a design studio.
Check your layout before ordering. Sheets go to print as submitted.
How to apply
- Clean the surface. Wipe it down and let it dry completely — dust or oil will stop the sticker bonding.
- Separate the backing. Lift the design away from the paper backing so it stays on the clear top film.
- Position and lay it down. Place one edge first, then smooth outwards from the centre to push the air out.
- Burnish firmly. Rub over the whole design with a squeegee, a card, or your thumb.
- Peel the top film slowly. Pull back at a low angle. If any part lifts with it, lay it back down, burnish again, and carry on.
No heat. These are stickers, not heat transfers — do not use a heat press or an iron.
Hard surfaces only. Made for smooth, non-porous surfaces such as glass, ceramic, metal, acrylic and hard plastic. They will not bond to fabric.
Care: hand wash only. Avoid dishwashers, soaking, and abrasive scrubbing.
Turnaround
Same-day processing on most orders.
Delivery
Shipped nationwide via UPS. Ground, 2-Day, Next Day and Saturday delivery are all available at checkout.
Local pickup
Prefer to collect your order? Local pickup in Houston, TX can be selected at checkout.
