Skip to content
Ships out TODAY if ordered by: 2:00 PM CDT
Free Ground Shipping over $50 (832) 350-8693
Cart 0 Ships today · 1h 16m left
Create A Rolling UV DTF Gang Sheet
Create A Rolling UV DTF Gang Sheet - Image 2
Create A Rolling UV DTF Gang Sheet - Image 3
Create A Rolling UV DTF Gang Sheet - Image 4
Builder · Rolling

Create A Rolling UV DTF Gang Sheet

From $5.63 grows with your layout

A continuous UV DTF sticker sheet that grows as you add designs, with no size to guess at up front. Your price follows the length your layout actually uses.

Arrange everything in the builder right in your browser. No design software required.

  1. Open the builder, the sheet grows as you add designs
  2. Arrange your designs in the builder
  3. Add the finished sheet to your cart

Best for

  • Mixed designs
  • Small batches
  • Maximizing film
  • Tumblers & hard goods
  • Clear UV DTF film

    Printed and ready to apply.

  • Grows as you build

    The sheet grows as you add designs.

  • Same-day processing

    On most orders placed before the daily cutoff.

Good to know

Do I pay for empty space?
Rolling sheets grow to fit your layout, subject to a minimum length. Empty space within the sheet is still charged.
Can I change it after ordering?
If you ordered with an account, you can request an edit from the order page in My Account while the order is processing. If we approve it, you get one round of changes to your designs within the time we give you. The number of sheets, their sizes and the quantities stay as ordered.
What files work best?
PNGs at full print resolution with fully transparent backgrounds, sized at final sticker size. The Artwork tab has the details.

Only pay for the length you fill

A rolling gang sheet has no fixed size. You start with a full-width roll and keep adding artwork down the sheet for as long as you need. The sheet extends with your layout, and the price follows it. If you do not know in advance how much space your stickers will take, this is the option to choose.

These are hard-surface stickers, not garment transfers. They go on tumblers, mugs, glass, candles, signage and packaging, and they are applied by hand with no heat press.

How it works

  1. Open the builder on this page to launch the layout tool in your browser.
  2. Add your artwork. Upload your PNGs, then drag, scale, rotate and duplicate them down the roll. The sheet extends as you fill it.
  3. Add to cart. Your price is calculated from the finished length of your layout and shown in the builder before you check out.

Pricing

Rolling sheets are priced by how much of the roll your finished layout occupies, so packing your designs tightly directly lowers what you pay. The running price updates in the builder as you add and move artwork, and that figure carries through to your cart.

Prefer to pick a set size instead? Use our fixed-size UV DTF gang sheets, priced at a flat rate per square foot.

File requirements

  • PNG files at 300 DPI with a fully transparent background.
  • Sized at final sticker size. What you place on the sheet is exactly what we print.
  • Trim the empty transparent space around each design before uploading.
  • Keep edges clean and sharp. Soft or semi-transparent edges print with a visible halo.

Do not mirror your artwork. UV DTF prints right-reading — a mirrored file comes out backwards on the finished sticker.

Tip: small text and thin lines survive better on stickers than on fabric, but 300 DPI at final size is still the floor.

What we do not do

We print your files exactly as supplied — we do not remove backgrounds, resize artwork, or repair low-resolution images. We are a printing service, not a design studio.

Check your layout before ordering. Sheets go to print as submitted.

How to apply

  1. Clean the surface. Wipe it down and let it dry completely — dust or oil will stop the sticker bonding.
  2. Separate the backing. Lift the design away from the paper backing so it stays on the clear top film.
  3. Position and lay it down. Place one edge first, then smooth outwards from the centre to push the air out.
  4. Burnish firmly. Rub over the whole design with a squeegee, a card, or your thumb.
  5. Peel the top film slowly. Pull back at a low angle. If any part lifts with it, lay it back down, burnish again, and carry on.

No heat. These are stickers, not heat transfers — do not use a heat press or an iron.

Hard surfaces only. Made for smooth, non-porous surfaces such as glass, ceramic, metal, acrylic and hard plastic. They will not bond to fabric.

Care: hand wash only. Avoid dishwashers, soaking, and abrasive scrubbing.

Turnaround

Same-day processing on most orders.

Delivery

Shipped nationwide via UPS. Ground, 2-Day, Next Day and Saturday delivery are all available at checkout.

Local pickup

Prefer to collect your order? Local pickup in Houston, TX can be selected at checkout.